Creative Wrapping Ideas For Bottled Alcohol Gifts

how to gift wrap a bottle of alcohol

Whether you're giving a bottle of wine, champagne, or liquor, wrapping alcohol in a fun and creative way can make gift-giving extra special for your friends and family. While the shape of a bottle can be tricky, there are several ways to wrap it elegantly, and it's easier to do than it sounds! All you need are basic gift-wrap supplies and a few minutes of your time.

Characteristics Values
Wrapping Supplies Wrapping paper, gift bags, tissue paper, ribbons, twine, glue, scissors, tape
Wrapping Paper Type Traditional thin, glossy paper from the roll; holiday-themed paper; wine-themed paper
Wrapping Techniques Wrap and tape paper around the bottle, fold and tape the top and bottom; wrap twine around the bottle with glue; wrap the bottle in a tea towel or cloth; place the bottle in a gift bag with tissue paper
Gift Basket Ideas Mason jar, mini liquor bottle, mixer, straw, ribbon; cocktail ingredients, recipe card

cyalcohol

Using wrapping paper

Wrapping a bottle of alcohol may seem difficult, but it's actually quite simple. Here's a step-by-step guide using wrapping paper:

Firstly, choose a flat surface, such as a table or desk, and unspool your wrapping paper with the top side facing down. It's important to choose the right type of wrapping paper; traditional thin, glossy paper works better than stiff kraft paper as it's more forgiving. If you're giving the bottle as a holiday gift, you might want to choose a festive design or a colour that matches the occasion.

Now, place your bottle of alcohol on the paper. If the bottle is round, rectangular, or square, make sure to leave some room around it so you can easily wrap the paper. A good rule of thumb is to position the bottle lengthwise about 3 inches (7.6 cm) from the edge of the paper.

Next, wrap the paper around the bottle and cut the paper slightly past where it connects. Then, fold the cut edge and secure it with tape. You can use clear tape or double-sided tape, whichever you have available.

Roll the bottle on the paper until the edge meets the tape. Now, carefully slide the bottle down towards the bottom edge of the paper tube, leaving a small gap. Tuck in the bottom edges of the paper to cover the base of the bottle and secure it with tape.

Finally, fold the top of the paper and tape it closed. You can add a ribbon or a bow to give it a fancier look. If you want to get creative, you can make triangle-shaped folds or a fan shape with the paper at the top and secure it with a ribbon.

And that's it! You've successfully gift-wrapped a bottle of alcohol using wrapping paper.

cyalcohol

Using a tea towel

A tea towel is a great way to wrap a bottle of alcohol, and it serves as a second gift. Tea towels are typically a larger, square piece of lightweight cotton fabric. You can use a patterned tea towel to make it easier to face the pattern correctly.

  • Lay the tea towel flat on a table with the design facing down. If your tea towel has a print, make sure the design that is face-up on the table is upside down. This will allow the print to be in the correct direction once you're done.
  • Place the bottle in the middle of the top half of the tea towel, with the bottle neck sticking out.
  • Fold the bottom half of the tea towel up over the bottle.
  • Take the right corner and fold it up to meet the bottle side. Repeat with the left corner.
  • Fold the right side over and tuck it in slightly. Repeat with the left side.
  • Secure the top with a ribbon, twine, or a piece of string. You can also add a gift tag.

If you are wrapping two bottles together, follow these steps:

  • Lay the tea towel flat on a table.
  • Place the two bottles together in the middle of the towel.
  • Roll the tea towel around the bottles, ensuring there is a gap in the middle.
  • Fold the bottles together and tie them closed above the bottles or around their necks.
  • You can attach a gift tag if you like.

cyalcohol

Using a cocktail mason jar

Gifting alcohol in a cocktail mason jar is a fun and budget-friendly idea that can be personalised however you like. It's also a great way to get around the difficulty of wrapping an oddly shaped bottle.

To create a cocktail mason jar gift, you'll need a mason jar, a mini bottle of liquor, a mixer (e.g. soda), a straw, twine or ribbon, and a gift tag. You can find mini bottles of liquor at most liquor stores, and mason jars can be purchased online or at some craft stores.

When it comes to assembling your gift, start by finding a soda can that fits inside your mason jar. Regular soda cans will fit in larger jars, but for smaller jars, you may need to look for mini-skinny" cans. Once you've found your soda, place it inside the jar, and add two pieces of twine or ribbon around the top of the jar, tying a double knot to secure it. Then, insert your straw and add the alcohol bottle, finishing with another double knot to secure everything in place. You can also add a gift tag with a personalised message or the recipe for the cocktail. Finally, tie a bow with the remaining twine or ribbon, and your gift is ready to give!

These cocktail mason jar gifts are perfect for weddings, bachelorette parties, holidays, birthdays, or any other occasion. You can customise the cocktail to the recipient's favourite drink, or get creative with different drink combinations. They're a fun and unique way to gift alcohol, and your recipient will surely appreciate the thoughtfulness and effort that went into creating their gift.

cyalcohol

Using a gift bag

Next, you can decide whether to place the bottle directly into the bag or to add some tissue paper first. Tissue paper can help to conceal the shape of the bottle and make the gift look fancier. Solid-coloured tissue paper is often a better choice than patterned wrapping paper, as it is less likely to clash with the bag.

If you want to add an extra decorative touch, you could include a set of glasses or other alcohol-related accessories in the bag. You could also add some ribbon to the bag handle or around the neck of the bottle. This can be a nice way to enhance your wrapping and make it more festive or themed. For example, you could use blue ribbon for a baby boy or pastel green ribbon for a springtime party.

Finally, if you want to make your gift bag more personal, you could attach a customised name tag or gift tag. This is a great way to add a thoughtful touch to your gift and ensure it feels special.

cyalcohol

Using an old shirt sleeve

Firstly, select an old shirt. It is recommended to avoid using one of his shirts, as the recipient may not appreciate it. Iron the shirt sleeves and cuffs to ensure they look neat and tidy. You can also use a little spray starch to enhance the finished product.

Next, place the shirt on a table and lay the bottle on the sleeve, positioning the top of the bottle about one inch below the cuff's edge. Cut the sleeve about four inches below the bottle's bottom. Now, turn the sleeve inside out and secure the bottom with a rubber band. Place the bottle inside to check the fit, and adjust the rubber band's position if needed.

Once you are happy with the length, remove the bottle and cut away any excess fabric. If desired, you can stitch the bottom closed for a more permanent wrapper, or simply leave the rubber band in place. Finally, turn the sleeve right-side out again and insert the bottle.

You can further decorate your gift by adding a tie-ribbon or a bow tie. Trim the ends of the ribbon and adjust the "collar" as needed. If you have leftover shirt fabric, you can cut it into squares and make sachets filled with lavender or other unisex scents like peppermint, citrus, or cinnamon.

Frequently asked questions

A gift bag is a great way to disguise the shape of the bottle. You can add tissue paper inside the bag to make it fancier. Alternatively, wrap the bottle in a tea towel or a sleeve cut from an old dress shirt.

Unspool some wrapping paper on a flat surface. Place the bottle on the paper, leaving a few inches of space at the edge. Wrap the paper around the bottle and cut the paper slightly past where it connects. Fold the cut edge and add a strip of double-sided tape. Roll the bottle in the paper until the edge meets the tape. Slide the bottle to the bottom of the paper and tuck in the edges.

Wrap twine around the bottle, adding a thin layer of glue as you go. You can add buttons, beads, or other decorations as you like. Alternatively, place the bottle inside a pair of patterned or holiday-themed socks and tie a knot at the top.

You can include a set of glasses or a cocktail recipe card. A cocktail gift basket is another option, where you can include mixers (e.g. soda), straws, and ribbons.

Written by
Reviewed by

Explore related products

Share this post
Print
Did this article help you?

Leave a comment